Power adapter

Attention: Do not open your computer or attempt any repair before reading and understanding the Read this first: Important safety information.

Note: The P330 Tiny computer supports the following Tiny-in-one (TIO) monitor models: Tiny-in-One 23- Monitor (MT: 10DQ), Tiny-in-One 22- Monitor (MT: 10LK), Tiny-in-One 24- Monitor (MT: 10LL), TIO22Gen3- Monitor (MT: 10R1), TIO22Gen3Touch- Monitor (MT: 10R0), TIO24Gen3- Monitor (MT: 10QY), and TIO24Gen3Touch- Monitor (MT: 10QX). When using the P330 Tiny computer with the TIO monitor, ensure that you use the 135W power adapter that comes with the P330 Tiny computer.

Remove any media from the drives and turn off all connected devices and the computer.
Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.
Replace the power adapter.
Note: Your power cord might look different from the one illustrated.
1. Remove the power adapter.
  Figure 1. Removing the power adapter
2. Remove the power cord.
  Figure 2. Removing the power cord
3. Install the power cord.
  Figure 3. Installing the power cord
4. Install the power adapter.
  Figure 4. Installing the power adapter