Attention: Do not open your computer or attempt any repairs
before reading the Important Product Information Guide.
Remove any media from the drives and turn off all connected devices and the computer. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
Remove the computer cover. See Removing the computer cover.
Remove the front bezel. See Replacing the front bezel.
Pivot the drive bay assembly upward. See Pivoting the drive bay assembly upward and downward.
Disconnect the power button cable from the system board.
Replace the power button.
Figure 1. Removing the power button
Figure 2. Installing the power button
Connect the new power button cable to the system board.
Reinstall the removed parts. To complete the replacement, see Completing the parts replacement.