3.5-inch storage drive

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines:
  • Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for frequent changes or replacement.
  • Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
  • Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get damaged.
  • Do not apply pressure to the internal storage drive.
  • Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage drive on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
  1. Remove the power cord. See Power cord.

  2. Remove the computer cover. See Computer cover.

  3. Disconnect the signal cable and the power cable from the storage drive.

Removal steps

  • Type 1


    remove the hard disk drive (HDD)


    remove the hard disk drive (HDD)

  • Type 2


    remove the storage drive (HDD) cage


    remove the hard disk drive (HDD)


    remove the hard disk drive (HDD)