Enable power-on password

If the administrator password has been set, you can enable power-on password to enforce greater security.
  1. Open the UEFI/BIOS setup utility.
  2. Select Security > Power on Password and press Enter.
    Note: The administrator password must be set in advance.
  3. Change the setting to Enabled.
  4. Select Exit > Exit Saving Changes.
If power-on password is enabled, a prompt appears on the screen every time you turn on the computer. You must enter the administrator or user password to start the computer.
Parent topic: Set passwords in UEFI/BIOS setup utility


<© Copyright Lenovo 2021.>