M.2 solid-state drive

Prerequisite

Before you start, read Important safety information and print the following instructions.

Attention: To replace the Optane memory in the M.2 solid-state drive slot, go to https://support.lenovo.com/docs/tg_ssd for details.

Replacement procedure

  1. Remove the computer cover. See Computer cover .

  2. Remove the memory and M.2 solid-state drive shield. Then, remove the screw from the M.2 solid-state drive.
    Remove the screw from the M.2 solid-state drive

  3. Slide the M.2 solid-state drive out.
    Slide the M.2 solid-state drive out

  4. Install the new M.2 solid-state drive in.
    Install the M.2 solid-state drive in

  5. Secure the M.2 solid-state drive with the screw.


    Secure the M.2 solid-state drive with the screw

  6. Reinstall all removed parts.

  7. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables to the computer.
    Note: If a locking device is available, use it to lock the computer.
Parent topic: Replace a CRU


<© Copyright Lenovo 2021.>