PCIe card

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

For access, remove the Left side cover.

Removal steps

  • Type 1
    Note: The PCIe card retainer is only available on some graphics cards.

    Remove the PCIe card retainer


    Remove the PCIe card with the extender

    Step Screw (quantity) Torque
    2 #6-32 × 7.5 mm (0.3 inches), Nickel coated (1) 0.33 ± 0.05 Nm (3.45 ± 0.57 kgf-cm)

    Remove the PCIe card from the extender

    Step Screw (quantity) Torque
    1 M3 × 5 mm (0.2 inches), Zn coated (2) 0.56 ± 0.05 Nm (5.75 ± 0.57 kgf-cm)
  • Type 2
    Remove the PCIe card with the extender


    Remove the PCIe card from the extender

    Step Screw (quantity) Torque
    1 M3 × 5 mm (0.2 inches), Zn coated (2) 0.56 ± 0.05 Nm (5.75 ± 0.57 kgf-cm)
  • Type 3
    Remove the PCIe card

    Note: For NVIDIA ConnectX-6 Ethernet Adapter card, the following fiber modules can be removed.

    Remove the fiber modules

Parent topic: PCIe card

<© Copyright Lenovo 2023.>