Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access,
do the following:
Remove the Left side cover.
Disconnect the E-lock cable from the system board.
Note: To remove the screws, you need a special tool (T15 star
wrench).
Removal steps
| Step | Screw (quantity) | Torque |
|---|---|---|
| 1 | M3 × 5 mm (0.2 inches), Nickel coated (1) | 0.56 ± 0.05 Nm (5.75 ± 0.57 kgf-cm) |