Use with a Tiny-In-One monitor

Note: When installing the computer to the TIO monitor, ensure that you use the ac power adapter that comes with the computer.

Primary video display output switching

The computer works with its integrated graphics card by default when it is installed to the TIO monitor. You can turn on or turn off the computer by pressing the power button on the TIO monitor. Any other devices connected to TIO monitor function the same as they are connected to the computer.

To switch the primary video display output from the integrated graphics card to the discrete graphics card, do the following:

  1. Turn on or restart your computer.

  2. Before Windows starts up, repeatedly press and release F1 (depending on the keyboard settings) until the Setup Utility program opens. If a BIOS password has been set, enter the correct password when prompted.

  3. Locate the Select Active Video submenu and select PEG. Then press F10 to save changes and exit.

  4. Connect the discrete-graphic-card connector on the computer with the DisplayPort or HDMI connector of the TIO monitor using an applicable dongle.

  5. Press the mode-switching button on the TIO monitor to change from the TIO mode to the DP mode or HDMI mode.

When the computer works with the discrete graphics card, pressing the power button on the TIO monitor only turns on or turns off the TIO monitor. Devices connected to the TIO monitor do not function the same as they are connected to the computer.

Intel Turbo Boost Technology

Intel Turbo Mode capability is designed to allow the processor to assess its own thermals, current, and power to come up with a dynamic upper limit on its frequency. This means that the processor can run at frequency higher than the advertised base frequency, and at any frequency in the inclusive range between maximum turbo frequency and the advertised base frequency at any time.

If the computer is installed with an i7-13700, i9-13900, i7-14700, or i9-14900 microprocessor, the computer does not support Intel Turbo mode when installed in the following TIO monitors:

  • ThinkCentre TIO27 (MT: 10YF)

  • ThinkCentre 超级Q27 (MT: 10YF)

  • ThinkCentre TIO27q (MT: 10YG)

  • ThinkCentre TIO22Gen3

  • ThinkCentre 超级Q22Gen3

  • ThinkCentre TIO22Gen3Touch

  • ThinkCentre 超级Q22Gen3Touch

  • ThinkCentre TIO24Gen3

  • ThinkCentre 超级Q24Gen3

  • ThinkCentre TIO24Gen3Touch

  • ThinkCentre 超级Q24Gen3Touch

Parent topic: Get started with your computer

<© Copyright Lenovo 2023.>