| Specification | Description |
|---|---|
| Memory | Low Power Double Data Rate 5X (LPDDR5X), soldered on board, up to 64 GB |
| Storage device |
One slot, 2280 M.2 solid-state drive, up to 2 TB Note: In case of M.2 SSD replacement, your computer only supports single-sided M.2 SSD. Double-sided M.2 SSD is not applicable due to the height limitation of the slot. |
| Audio |
|
| Display |
|
| Security features |
|
| Wireless features |
|
*for selected models
This section helps you to set up your computer and get it ready for use.
Turn on the computer
Follow the instructions to turn on your computer.
Complete the operating system setup
Before exploring your computer, you need to complete the operating system setup. The setup includes but is not limited to:
- Select the country or region.
- Connect to an available network.
- Accept the license agreement.
- Create a Microsoft account or log in with your Microsoft account.
- Set up your password, fingerprint, or facial recognition as preferred.
- Customize your experience.
- Depending on the model, some settings might not be available on your computer.
- Do not turn off your computer and ensure it is connected to the ac power during the whole process.
Follow the instructions to set up the operating system.
Use ac power
Power source of the ac power adapter:
- Power: 45 W or 65 W
- Sine-wave input at 50 Hz to 60 Hz
- Input rating of the ac power adapter: 100 V to 240 V ac, 50 Hz to 60 Hz
- Output rating of the ac power adapter: 20 V dc, 2.25 A or 3.25 A
When the battery power is low, charge your battery by connecting your computer to ac power with the supplied power adapter. The 65 W ac power adapter supports the rapid charge function, the battery is 80% charged in about one hour when the computer is turned off. The actual charging time depends on the battery size, the physical environment, and whether you are using the computer.
Battery charging is also affected by its temperature. The recommended temperature range for charging the battery is between 10°C (50°F) and 35°C (95°F).
Maximize the life of the battery
Follow the instructions to maximize the life of the battery.
- Use the battery until the charge is depleted and recharge the battery completely before using it. Once the battery is fully charged, it must discharge to 94% or lower before it will be allowed to recharge again.
- Keep the battery from full charge when it is not in heavy use. For more information, refer to the Battery settings tab in the power section of the Vantage app.
- The battery may optimize its full charge capacity based on your usage. After prolonged periods of limited use, full battery capacity may not be available until you discharge to as low as 20% and recharge completely. For more information, refer to the power section of the Vantage app.
Your computer supports Flip to Start feature. If you enable this feature, the computer will start up automatically without pressing power on button when you open the lid.
Flip to Start feature is disabled by default. To enable Flip to Start feature,
If the Vantage app is uninstalled, you can enable this feature in UEFI BIOS menu: