Register FIDO2 USB device in ThinkShield Passwordless Power-On Device Manager

Follow the instructions to register FIDO2 USB device in ThinkShield Passwordless Power-On Device Manager.

Turn on the computer.
Press F12 during the power-on process.
If you set a power-on password, you are prompted to enter the correct password.
Select App Menu > ThinkShield Passwordless Power-On Device Manager and press Enter
Insert the FIDO2 USB device to register the device by following steps:
1. Select the available FIDO2 USB device that you want to register in the Discovered Devices field.
2. Click Yes in the displayed window to confirm the device you selected
3. If you set a power-on password, you are prompted to enter the correct password.
4. The User operation request window is displayed. You are prompted to press the button on the connected FIDO2 USB device, and then follow the on-screen instructions to close the window.
5. Press Esc to exit and restart your computer.

Note:

If you want to unregister your devices, click the available FIDO2 USB device that you want to unregister in the My Device field and enter the correct power-on password for verification.
If you use more than one FIDO2 USB device with a common identifier for registration, only one device is available.