E-lock

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

For access, do the following:

  1. Remove the Computer cover.

  2. Disconnect the E-lock cable from the system board.

Note: To remove the screws, you need a special tool (T15 star wrench).

Removal steps


Remove the E-lock

Screw (quantity)

Torque

M3 x 5 mm - T15 (1)

5.0 ± 0.5 lb/in
Parent topic: CRU replacement

<© Copyright Lenovo 2023.>