3.5-inch hard disk drive

Prerequisite

Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines:

  • Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for frequent changes or replacement.

  • Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.

  • Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get damaged.

  • Do not apply pressure to the internal storage drive.

  • Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage drive on a soft material, such as cloth, to absorb physical shocks.

For access, do the following:
  1. Remove these parts in order, if any:

  2. Disconnect the signal cable and the power cable from the 3.5-inch hard disk drive.

Removal steps


Remove the storage drive and the bracket


Remove the storage drive from the bracket

Parent topic: CRU replacement

<© Copyright Lenovo 2024.>