Follow the instructions to reset
storage drives to non-RAID.
Attention: All the existing data stored on the
selected drive will be erased after you reset it to non-RAID.
-
Enter the Intel RST configuration utility.
-
Select the volume that you want to reset under RAID Volumes. Press Enter
to open the RAID VOLUME INFO window.
-
Select the drive that you want to reset under RAID Member Disks. Press
Enter to open the PHYSICAL DISK INFO window.
-
Select Reset to Non-RAID and press Enter. When prompted, select Yes to confirm the reset action.
After the reset process finishes, the Intel
(R) Rapid Storage Technology window is displayed. The
reset drive is listed under Non-RAID
Physical Disks, and the volume of the reset drive
is still listed under RAID Volumes. However, the status is changed from Normal to Failed or Degraded.
-
Press F10 to save changes and exit.