Smart USB protection

The Smart USB Protection function is a security function that helps prevent data from being copied from the computer to USB storage devices connected to the computer. You can set the Smart USB Protection function to one of the following modes:

Disabled (default setting): You can use the USB storage devices without limitation.
Read Only: You cannot copy data from the computer to the USB storage devices. However, you can access data on the USB storage devices.
No Access: You cannot access the USB storage devices from the computer.

To configure the Smart USB Protection function:

Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.
Select Security > Smart USB Protection and press Enter.
Select the desired setting and press Enter.
Press F10 or Fn+F10 to save the changes and exit.